650B

- Designed, tested, and raced to victories on the World Cup DH and Enduro World Series circuits - Tie beam triple-cavity rim design resists damage and prevents air loss under impacts - 29mm internal width optimized for 2.35" to 2.8" Trail, All-mountain, and DH tires - E-sync hubs Specs: - Hub Model: E-SYNC - Freehub Body: Shimano HG - Wheel Tire Type: Tubeless Ready - Wheel-Brake Comp.: Disc IS 6-bolt - Rim Material: Aluminum - Spoke Type: Sapim D-Light - Valve: Presta - Rim Construction: Double wall

- Affordable and reliable disc brake wheelset for entry-level hybrid, MTB and touring bikes - Black Alex Z1000 single wall rim offers great performance and look at a low price - Non-machined sidewalls give best results with disc brakes, but can also be used with rim brakes - Black Shimano Tourney TX505 and TY505 Center Lock disc hubs feature adjustable cup-and-cone bearings for trouble free long term performance & quick release 100mm front and 135mm rear axles for increased convenience - 36 stainless steel spokes and brass nipples for improved durability - TY505 rear hubs are compatible only with 7 speed cassettes only, while TX505 hubs are compatible with 8-10 speed and some 11 or 12 speed cassettes.

Increase the agility of lightweight eMTBs using this specific aluminum wheelset. Aligned to the purpose of lightweight eMTBs, the HX 1700 SPLINE LS aim for the right balance between lightness and resistance for more dynamic handling. The 350 hubs have been redesigned for eMTB to offer more resistance to the acceleration and braking forces. In addition, the spokes have been modified to increase their strength without drastically increasing the weight. These wheels are ready to be ridden on the fastest lines in technical sections and to carve into fast and tight turns. - Built to provide enhanced riding agility for light eMTBs - Agility-focused aluminum rims are light, yet resistant; helping to enable agile riding - New Hybrid-specific spokes for an advanced riding experience, combining resistance and lightweight - Built with the 350 Hybrid LS hub for enhanced reliability and contained weight. The well-known Ratchet System 24 makes the load distribution uniform, providing lasting durability

Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down. - 30mm inner rim width with 32 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - 6-bolt rotor mounts - Top-tier EZO sealed bearings

Proterra Tough i30 wheels keep the trail in check while everything else blurs by in the periphery. Reinforced by our proven Dual I-Beam support, Proterra Tough rims feature a 30mm internal width to provide higher tire volume while also increasing sidewall support at lower pressures. High-quality EZO sealed bearings are designed to endure through seasons of aggressive riding, while a responsive 6-pawl freehub provides the snappy 3.7 degrees of engagement you demand when cranking out of corners. Choose Proterra Tough when you need a wheel that won't let you down. - 30mm inner rim width with 32 spokes laced in a 3-cross pattern - 6069 aluminum alloy rim is TCS 2.0 tubeless-ready - Sapim Secure Lock 14-gauge brass nipples provide bomber durability, while double butted 2.0/1.8/2.0mm J-bend spokes make replacement a breeze. - Tubeless tape, Solid Strip, and black alloy valves are preinstalled, making the wheels ready for tubeless tires the moment they arrive on your doorstep. The TCS 2.0 Solid Strip is a durable strip that lies beneath the tape, prevents it from sagging at the spoke holes, makes it easier to mount a tire, and protects from puncture in the case of a broken spoke. - 6-bolt rotor mounts - Top-tier EZO sealed bearings

Road bikes are going where they’ve never gone before, are expected to do more, and are being ridden harder than ever. At the same time disc brakes are rewriting the rules of what’s possible with rim design. For this new era, the Zipp 303 Firecrest Tubeless Disc-brake wheelset sets the new standard. With a disc-specific, tubeless rim, the 303 Firecrest Carbon Clincher is now internally 21mm wide and faster than ever. Designed from the start as a tubeless rim, the 303 Firecrest features a rim bed made with internal ridges to lock the tire’s bead in place, ensuring secure performance, even when ridden at lower tire pressures. A new carbon fiber layup keeps weight low while maintaining the 303’s legendary durability. The rim’s lightweight design allows the 303 to glide up the steepest climbs while SRAM's robust 77/177D hubset keep the wheels stiff and responsive. Each Wheel Includes: - Zipp Tubeless valve extender and valve-core wrench - Zipp rim tape (factory taped) - Zipp Tangente quick-release skewer - Zipp thru-axle end caps

- The Stumphouse is a bombproof MTB wheelset with a modern 30mm wide tubeless rim. - Stout lacing of 32 spokes front and rear means your only worry is making sure you have enough time to ride. - All Prologue series wheels are built on Skyuka hubs featuring 10-degree engagement and Abec 3 sealed cartridge bearings. - The Skyuka MTB rear hub is available with a Shimano Hyperglide, Microspline or Sram XDR freehub body and requires no tools to swap between the different freehub body standards. - Built with Pillar TB2018 round double butted spokes and external brass nipples, the Stumphouse is a great budget upgrade that can be used for everyday trail riding.

After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

Rims: WTB DX18 27.5'' (ETRTO 584), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Front hub (-01): Alloy, Disc and Rim brake compatible, Sealed, Quick Release, Hollow CrMo axle M9x100mm - Anodized black finish - Adjustable bearings - Quick Release Binders Included Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Rear hub: Alloy, Disc and Rim brake compatible, Shimano HG, Sealed, Quick Release, Hollow CrMo axle - Anodized black finish - Adjustable bearings - Quick Release Binders Included Assembled in North America by experienced wheelbuilders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Shimano FH-MT200-B (Black), Shimano logo, M9x141mm BOOST141 - HG Freehub compatible with 8 - 10, MTB 11-speed - Center Lock disc mount - Adjustable bearings - Quick Release binder included - Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black) - Tubeless Compatible (Valve and Tape not included)

After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

- 27.5"x20 KT Alloy ATB style front wheel - STW A275 silver rim with silver hub - UCP silver spokes

The XMC 1200 Spline is the ultimate all mountain wheel. A carbon layup specifically tuned for all mountain use makes the rim tough yet super-light. The hubs feature the latest incarnation of DT's Ratchet System. Extremely refined machining and fully lasered graphics make them the lightest hubs DT Swiss has ever made. Together with bladed top-end spokes and perfect DT Swiss build quality, this wheel is made to ride trails with speed and confidence. - Requirement-specific carbon rims are designed for the ultimate all-mountain riding experience - The carbon rim combined with the DT Aerolite and DT Aero Comp spokes ensure perfect wheel stiffness - The low weight of the 1200 Spline reduces the moment of inertia and increases acceleration, leading to higher average speeds compared with aluminum wheels with the same energy input - 180 straightpull hub is a lighter, stiffer, and more durable hub - Alloy presta valve is lightweight - Wheels are tubeless ready, with a rim design that ensures a precise and safe fit of the tire even when ridden hard - Nipples have DT Pro Lock to prevent the spoke-nipple connection from loosening - 3 cross spoke pattern, DT AeroComp straight pull spokes, DT ProLock Squorx ProHead aluminum spoke nipples

The XMC 1501 SPLINE ONE was designed for all kinds of mountain adventures. A 30 mm tubeless optimized carbon rim easily supports wider tires, while the double butted competition race spokes and 240 hub completes this durable and versatile wheel. - Designed for All Mountain applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples

The XM 1700 SPLINE wheels were designed to dominate the mountain. Light and robust welded rims with perfect tubeless compatibility for grip and puncture resistance, built on reliable and smooth rolling 350 hubs. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for All Mountain applications

EXC 1501 SPLINE ONE combines everything a modern enduro rider wants in a wheel. The 30 mm wide carbon rim gives you the precision to stay on track even on the trickiest lines while a 240 hub keeps it spinning. Both components are held together by performance weight optimized competition race straightpull spokes. - Designed for Enduro applications - Carbon rim with 30mm internal width - 240 hub - Competition race spokes and Squorx nipples

Introducing the Gravel racing GRC 1400. With a holistic approach of engineering DT re-thought the characteristics of a modern benchmark setting gravel wheel set. Aerodynamic efficiency, ideal support of wide gravel tires leading to comfort and traction off-road as well as remarkable durability are only some of the key features that make this wheel set the perfect companion for your next gravel adventure. - 42mm aero-optimized rim depth for 35mm wide gravel tires

HG 1800 Spline wheels help you participate in rides again; commute to work, plan longer trips, or simply discover the joy of cycling. E-road bikes are there to assist riders to keep going. In doing so, the wheels undergo higher loads and torques on longer distances, due to the extra weight and power from the specific frame/motor constructions. Hybrid Road wheels are built to assist with these additional loads by increasing the strength of the individual components that make up the wheel. - Aluminum, sleeved rim joint rim - Hooked bead, tubeless ready - Inner width of 24 mm supports tires up to 50 mm - 25mm Rim Height - 370 Spline hub - DT Swiss tubeless ready tape installed, DT Swiss tubeless valve and valve guard included

- Eclypse DB743 Carbon - One piece molding - Inner Rim Width: 43 mm - Outer rim Width: 50 mm - Rim Height: 25 mm - Tubeless ready, requires tubeless tape/rim strip, not included - Presta valve - 28 holes - DT Champion - Black

- 27.5"x20 KT Alloy ATB style front wheel - STW A275 silver rim with silver hub - UCP silver spokes

- 27.5"x20 MTB Formula 6 bolt disc front wheel - STW A275 silver 36h rim with black hub - UCP silver spokes

Rims: WTB DX18 27.5'' (ETRTO 584), inner width: 18 mm - Anodized black finish - CNC machined sidewalls - Stainless steel eyelets - Rim wear indicator - Pinned joint - Drilled for Schrader valve - 36 holes Front hub: Shimano HB-M475 (Black) - 9x100mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub - Quick Release Binder included Rear hub: Shimano FH-M475 (Black) - 10x135mm - 6-Bolt Disc Mount - Adjustable Cup & Cone - Contact sealed hub and freehub body - Quick Release Binder included - Compatible with 8,9,10 speed (MTB 11 speed requires 1.85mm spacer, not included) - Assembled in North America by experienced wheel builders using Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

WCS Zeta GX 650B TA12 Wheelset

Rims: EVO JP95 27.5" - ETRTO 584-94 - Inner width: 94mm - Disc Brake Only - Drilled for Schrader valve - 32 holes Front hub: Novatec D201SB - 15x150mm (Axle not included) - 6-Bolt Disc Mount - Sealed cartridge bearings (x2) Assembled in North America by experienced wheelbuilders with Sapim stainless steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Rims: WTB ST i23 (Black), inner width: 23 mm - New TCS 2.0 Tubeless system - Solid Strip (included) protects and ensures a smooth surface between the tire and the rim - Easy On-Ramp profile allows for a smooth tire installation and stress- free inflation - Industrial Epoxy reinforced Pinned Joint provides repeatable tubeless consistency - Drilled for Presta valve - 32 holes - Rear hub: Formula DC22 (Black), Laser etched logo, M10x135mm - HG Freehub compatible with 8—10, MTB 11-speed - 6-bolt disc mount - Adjustable bearings - Quick-Release binders included - Tubeless Compatible (Valve and Tape not included) Assembled in North America by experienced wheelbuilders with Sapim 14G Stainless Steel spokes (Black) and 14mm Brass Polyax Nipples (Black)

- Position Front - Wheel Diameter/ISO 27.5'' / 584 - Axle Type QR - Hub Spacing 100mm - Wheel-Brake Comp. Rim - Freehub Body - - Wheel Tire Type Clincher - Rim Material Aluminum - Rim Construction Double wall - Rim Internal Width 19mm - Rim inner width range 0-21.9mm - Rim Color Black - Rim Drilling 36 - Hub Model Formula FM-21-QR - Wheel Weight - - Spoke Type Stainless - Valve Schrader - Rim External Width - - Depth 20mm - Rim Model Evo E-Tour 19 - Skewers Included Yes

Rims: WTB HTZ i30 27.5" - ETRTO 584-30 - Inner width: 30mm - 6061 series aluminum - Asymetric and angled spoke hole drilling distributes spoke tension more evenly - Reinforced I-Beam profile - Strong sleeved joint - Drilled for Presta valve - TCS 2.0 Tubeless System compatible - Solid Strip included - Tubeless valve included - 32 holes Rear hubs options: Shimano XT FH-M8110-B (Boost, MS) - Center Lock (6-Bolt adapter included) - Quick Engagement Freehub, 36 Points of Contact, 10 deg. engagement - HG compatible Shimano 11spd and Sram NX / SX splined 12spd (10spd and below needs spacer) - MS compatible 12 Spd Shimano Micro Spline Assembled in North America by experienced wheelbuilders with Sapim Race spokes (Black), Polyax Nipples (Black)

- Asymmetric rim design allows for a stronger wheel while offering the easy inflation and Stan's trademark unmatched airtight seal. - 25mm width optimized for 40mm Gravel tires and up to 2.3" mountain tires - Light and durable 6069 aluminum with welded joint and reinforced spoke bed

- Low-profile 30mm internal width optimizes tire shape, traction, and control for 2.3-2.6" tires - Durable 6069 aluminum with welded joint and reinforced spoke bed - BST Asymmetric design combines Stan's legendary easy tubeless inflation with a stronger, more balanced wheel build - Reinforced spoke bed, combined with the offset drilling of the asym design, builds into an incredibly durable wheel that brings added confidence to every ride.