Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Pumps/Inflation

XLAB Sonic Nut Inflation Holder
$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
XLAB X-Nut Inflation Holder
$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's X-Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The X-Nut is compatible with Xlab's Carbon and Super Wings.
Vittoria Pit Stop Tire Sealant
$10.99 - $14.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - 75mL: Repairs and inflates low-volume MTB tires in less than a minute. - 100mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
TwoFish Twofish Bikeblock Inflator Holder
$7.90
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
Topeak JoeBlow Sprint Floor Pump
$79.95
Topeak's Joe Blow Sprint quickly inflates tires thanks to its durable aluminum barrel, a sturdy steel base, a tight-sealing aluminum thumblock head that fits Presta and Schrader valves and an oversized, padded handle. And, the easy-to-read, top-mounted gauge lets you dial in the perfect pressure every time!
Topeak Mini Dual
$22.95
Topeak's Mini Dual is constructed of lightweight aluminum and sports a grippy Kraton and plastic handle for easy pumping. And, the thumb-lock head ensures an airtight seal on both Presta and Schrader valves.
Topeak Peak DX II
$29.95
Reach peak inflation pressure in a flash with Topeak's Peak DX II. Its butted-aluminum barrel and folding T-handle makes pumping up tires a snap! Plus, the thumb-lock SmartHead grips tight on both Presta and Schrader valves.
Topeak Peakini II
$19.95
Topeak's Peakini II is a powerful mini pump that's ideal for road and trail use. It sports a reversible head so you can pump both your Schrader and Presta valves with ease. And, its highly efficient, single action design and T-handle mean you'll be back out riding after a flat quicker than ever.
Topeak Pocket Rocket
$26.95
Topeak's Pocket Rocket boasts an aluminum barrel for superb function, durability and max pump power, while its plastic handle ensures pumping comfort. And, its aluminum thumb-lock head fits both Presta and Schrader valves.
Topeak Pocket Shock DXG
$59.95
A precision fork and shock pump with an easy-to-read dial gauge for accurate pressure readings up to 360 psi / 24.8 bar. An air release button and Pressure-Rite connector makes setting proper pressure easy and eliminates air loss when disconnecting, while the flexible hose takes stress off the valve stem when pumping. - Head: Pressure-Rite shock valve - Guage: 360 psi / 24.8 bar, Analog - Handle: Dual density polymer - Dimensions: 21.5 x 4.5 x 4.3 cm / 8.5" x 1.8 x 1.7" - Volume per stroke: 11cc - Barrel: Aluminum - Pressure Tuning: Air release button - Features: Flexible rotating hose - Weight: 170 g / 5.98 oz
Topeak Presta Valve Extender XL
$11.95
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
Topeak Shuttle Gauge Digital
$79.95
Easy-to-read digital gauge can be attached to a pump or used alone and provides accurate pressure readings up to 300psi / 20.7bar. Rotating head works with Presta, Schrader or Dunlop valves on bike / motorcycle / car tires, forks or shocks while the Thumb Lock lever ensures an airtight seal. The air release button allows fine tuning pressure. Specs - PUMP HEAD COMPATIBILITY: Presta / Schrader pumps - TIRE VALVE COMPATIBILITY: Presta / Schrader / Dunlop valves - GAUGE: Digital, 300 psi / 20.7 bar - UNIT: psi, bar, kg / cm2 - BATTERY: CR2032 x 1 (included) - THUMB LOCK: Aluminum - PRESSURE TUNING: Air release button - BODY: Aluminum / Engineering grade polymer - SIZE: 9.2 x 5.8 x 4.3 cm / 3.6” x 2.3” x 1.7” - WEIGHT: 102 g / 3.60 oz Added Features: - Rotatable head / gauge - Auto-off function
Topeak SmartGauge D2
$47.95
Topeak's SmartGauge D2 boasts a digital readout that goes up to 250 psi and it's compatible with Presta and Schrader valves, as well as shocks and suspension forks. The head rotates 180 degrees to get in tough spots, and an air release button helps you dial in the perfect pressure.
Supacaz SuaveAir
$200.00
- Full alloy forged floor pump - Laser etched graphics - Full Oil Slick finish - Oversized alloy piston shaft-Smooth and quiet operation - Patented auto-switching head fits presta and schrader valves
Silca #242 Gasket For Presta Chucks
$9.00
The Iconic SILCA 24.1 gasket is the heart of the press-on Presta chuck. The current 242 gasket utilizes a high tech and very red, fully synthetic elastomer base material.
Silca #323 Chuck Gasket for Reversible Brass Chuck & Silca Impero Head
$9.00
Replacement gasket for reversible brass chucks, modern Impero Frame Pumps, and Pocket Impero
Silca Hiro Side-Lever Locking Disc Chuck
$70.00
Years ago while Josh was working with the Team CSC at the Dauphine Libere, he noticed one of their mechanics using the most amazing little chuck to manage the disc wheel inflation. Unlike anything he had seen before, it was all metal and used a 'lollipop' lever on the side to lock onto the valve stems in disc wheels. The mechanic explained that these were made in Japan and were coveted by all the Euro-Pro mechanics due to their scarcity. So Josh set out to improve the design and make it available to cyclists everywhere. - Full metal construction, guaranteed for 25 years and covered by SILCAShield - Can effectively seal on valve stems as short as 10mm! - Uses SILCA 254 High-Tech Elastomer gasket - Adjustable gasket pre-load allows for a custom fit on any valve as well as compensation for gasket wear - Male Schrader thread fits into any Schrader chuck, or use SILCA Thread-On Schrader Adapter to fit a bare hose - Bullet-proof high-pressure, disc-compatible chuck for high-pressure situations.
Silca Replacement Hose w/Clamps
$20.00
n partnership with the rubber and tire experts at Continental , we are offering a custom extruded 3/16" ID air hose compatible with all historic PISTA Handles.
Silca Thread-on Schrader Chuck
$12.00
This chuck comes from the same vendor who supplied them to SILCA pumps for more than 25 years. It makes a great replacement or addition if you are buying a new Stainless Presta chuck or CP1 Disc Adapter for your older pump. This part is made from nickel-plated brass and uses an o-ring to seal the connection. - Hose barb fits into all SILCA hoses both old and new - Threads onto Schrader valves and all SILCA chucks with male Schrader threads (17-4 Presta chuck, HIRO, and CP1 Disc Adapter) - All metal construction, nickel-plated brass
SKS Air X-Press 8.0
$34.99
Now 50mm higher than before, the Air X-Press 8.0 is an upgrade of our sturdy and lightweight plastic floor pump with an accurate gauge for precise pressure control. - Displays both bar and PSI - Convenient handling due to proven SKS MULTI VALVE pump head with thumb lock lever - Inflates easily up to 8 bar/115 PSI
SKS AirKompressor 12.0 Floor Pump
$54.99
SKS's AirKompressor 12.0 Floor Pump can handle it all. The E.V.A. head works with all valves and the 174 psi/12 bar max pressure lets you fill up even the highest quality road tubulars. Fat mountain tires are also easy to air up, too, thanks to the high-volume, extra-long steel body. And, an oversize gauge and long hose make the AirKompressor perfect for every job.
SKS Airboy
$32.99
Don't let this diminutive pump fool you: SKS' Airboy has big lungs and it's ready to fill your tires quickly. Light and tough, this high-pressure pump fits in your jersey pocket easily and fills your tires up to 115 psi. The unique 2-chamber/2-plunger pumping system provides high pumping efficiency so you get back to your ride quicker. And, at only 62 grams, you'll forget you have this little bad boy when you're not using it.
SKS Airboy XL
$32.99
It's tough to go wrong with the original, and SKS' Airboy XL takes everything you love about Airboy and makes it high-volume specific. The 2-chamber/2-plunger pumping system provides plenty of efficiency, especially considering its tiny size! This high volume pump gets your larger tires up to 75 psi, regardless of whether you're running Presta or Schrader valves. The Airboy XL tackles whatever you're running with surprising toughness and quickness.
SKS Airflex Explorer Mini Pump
$44.99
Airflex Explorer Mini Pump is a small pump with great impact. The hose, stored in the pump tube, screws onto the valve head. Flexible hose prevents damage to valve stem during inflation. Pump handle is soft, easy-to-grip compound. Great pump for MTB or urban bikes. Small enough to fit in jersey pocket, but also includes a frame mount. - Inflates to 5 bar/73 psi - Compatible with Presta, Schrader, and Dunlop Valves - Includes a holder which attaches at cage mount - Length: 205mm - Weight: 132 grams - Made in Germany
SKS Airflex Racer Mini Pump
$44.99
Airflex Racer Mini Pump is a small pump with great impact. The hose, stored in the pump tube, screws onto the Presta valve head. Flexible hose prevents damage to valve stem during inflation. Pump handle is soft, easy-to-grip compound. Great pump for high-pressure tires. Small enough to fit in jersey pocket, but also includes a frame mount. - Inflates to 8 bar/115 psi - Compatible with Presta and Dunlop Valves - Includes a holder which attaches at cage mount - Length: 196mm - Weight: 105 grams - Made in Germany
SKS Airstep
$99.99
The Airstep Bicycle Foot Pump combines the virtues of a classic floor pump with a foot pump. - Extra-large pressure gauge - Integrated storage space for the spiral hose and head - Aluminum foot pedal allows you to inflate with the ergonomic strength of your legs - Pump locks down and includes a wall bracket as a space-saving solution - Inflates to 7 bar/102 psi - Compatible with Presta, Schrader, and Dunlop Valves - Made in Germany
SKS Airstep DIGI
$124.99
The digital update of the tried-and-tested Airstep foot pump impresses with a high-quality, precise digital gauge. The black LED display shows the pressure perfectly in bright orange numerals. The first-class sensor technology with a deviation tolerance of up to 1.5% guarantees a high measuring accuracy, thus ensuring optimum tire-pressure adjustments. Another innovation is the powder-coated aluminum foot pedal. Thanks to its scratch-resistant coating, it not only offers high-impact resistance, it also impresses with its modern black appearance.
SKS Airworx 10.0 Anthracite Floor Pump
$59.99
Airworx 10.0 Anthracite Floor Pump from SKS provides a large volume of air per stroke. The soft-touch handle with grip recesses provides a comfortable feel. The precision gauge can be easily seen, positioned at the top of the pump body. In addition to the long hose, the pump is fitted with a Multi Valve head for use with all valve types. - Inflates to 10 bar/144 psi - Compatible with Presta, Schrader, and Dunlop Valves - Replacement/rebuild parts are available - Solid metal base for a firm foothold - Measurements: 665mm height - Made in Germany
SKS Digital Airchecker
$36.99
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
SKS EVA Pump Head Grommets
$6.99
Bag of 3 replacement washers for EVA heads on all SKS floor pumps
Page 1 of 8 Next page