The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. Three sealed cartridge bearings make the Flash III iSSi’s smoothest rolling, most durable, lightest clipless pedals with multiple spindle length options. - Spindle Type: Flip III: Triple Bearing - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included
Replace worn-out spindles or customize your stance width, with these kits for iSSi Road pedals. - Chromoly spindles - Sealed cartridge bearing and bushing in an alloy cartridge - Compatible only with iSSi Road pedals - Installs with iSSi Road spindle tool (TL5499) - Pedal Spindle: 9/16" - Spindle Material: Chromoly Steel
$50.00 - $52.00
Replace or overhaul iSSi pedals with Bushing & Bearing Spindles with these handy kits, or customize your stance width with longer spindle options. Includes: - iSSi chromoly spindles - Sealed cartridge outer bearings - Inner Bushings - Spindle nuts - Seals - iSSi-branded end caps
- Extend the life of your iSSi Thump pedals by replacing beat-up or missing pins with the Thump Replaceable Pin Kit. - Includes 36 steel pins and 2mm spacers to replace both sides of two pedals - The standard pin height out of the box is 3mm with a 2mm spacer. For more traction, remove the spacer under the pin head to increase pin height to 5mm.
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. Plus, four degrees of float helps your knees track naturally during every crank revolution.
$125.00 - $130.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. With triple-sealed cartridge bearings and durable chromoly spindles, these pedals will spin smoothly for countless rides. Plus, four degrees of float helps your knees track naturally during every crank revolution.
Weighing in at a mere 260 grams per set, the SPRY, with its sleek, super low-profile design, makes a great addition to the XPEDO flat pedal line up. The magnesium-cast body measures only 11mm thin and allows plenty of ground clearance in the most aggressive terrains. Its large platform area with 14 pins on each pedal provides superior grip for maximum pedal efficiency. - Weight: 260g - Body: Magnesium - Spindle: CroMo - Bearings: 2 Cartridge - Bushings: 1 DU - Pins: 28 Straight Pins per pair - Size: 106x100x11 (mm)
- Weight: 220g - Body: NEP Injection-Molded - Spindle: Cromoly - Bearings: 3 Cartridge - Springs: SWP - Q-Factor: ±53 (mm) - Cleat: XPEDO THRUST 7 (6º Float or Fixed)
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms. - Includes 10 washers
VP's Split Cleats boast super-smooth and easy entry/exit into your clipless pedals, excellent durability and maximum power transfer. They're made of a tough and light composite material, are compatible with VP and Look Keo pedals (pedals sold separately) and even have areas that grip for walking traction. That's all great, but what really sets the Split Cleats apart is how easily and accurately they can be replaced when they wear out. The cleats split in half so that you simply remove each half and use the half still on the shoe to ensure perfect cleat placement every time! With these cleats you'll never have to fuss around trying to get your new cleats in the right place again and it only takes a minute or two to replace cleats, too. Genius! The Split Cleats are available in 2 models, one with 7 degrees of lateral float for your feet and one that's fixed (no float). - Fits VP and Look Keo pedals (pedals sold separately)
Under 200 grams per pedal, the ATAC MX 2 is super versatile and super affordable. The easy-to-clip-in ATAC system, large platform, and self-cleaning design make this the perfect choice for cyclists venturing off the road for the first time. The ATAC EASY cleat makes set up a breeze and clipping in and out even easier.
Fat bike, trail, and enduro riders will all enjoy the ATAC MX 4. With its large platform and ATAC system, the ATAC MX 4 is the perfect everyday, off-road or gravel road pedal. Cleat engagement is easy and positive in every condition and for every skill level. The hollow steel axle makes the pedal light yet durable. The open design keeps you rolling, clearing mud and debris every time you clip in.
The ATAC XC 8 is the pedal preferred by competitive cyclocross, mountain bike riders, and gravel road riders. It features the lightness of a carbon body and the durability of a chromed, hollow oversized steel axle. The exclusive ATAC system (TIME patent) offers very easy engagement and its open design automatically clears debris each time you step in. The ATAC XC 8 is also a great choice for trail riding or bike touring.
Speciale is the ultimate balance between aesthetics and performance. Developed by Time's engineers for the demands of the sport, this enduro pedal is made of a 6106-T6 aluminum body which is 20% more durable than other grades of aluminum. It features a wide platform, adjustable pins for optimal grip, and a micro-adjustable clamping system to meet the demands of the most advanced riders. The proven ATAC engagement system (TIME patent) allows easy clip in and positive, predictable release as well as a design that self-cleans even in the most difficult conditions. Like all Time pedals, the Speciale is 100% made in France at their factory in Nevers, exceeding high material and production standards.
Speciale 8 is Time's enduro pedal directly inspired by the renowned Sepciale 12. This enduro pedal is composed of an aluminum body that's slightly more compact than its big sister. You'll appreciate its stable platform with 4 adjustable spikes for optimal grip even unclipped and the micro-adjustable clamping system that meets the demands of the most advanced bikers. The patented ATAC engagement system (TIME patent) allows for easy insertion and positive, predictable release, as well as self-cleaning design, even in the toughest conditions. The Speciale 8 is entirely assembled in France in Time's Nevers factory, thus exceeding the highest standards in terms of materials and production.
The Iclic fixed cleat works with all XPro and Xpresso pedals. This cleat is only available independently and is not included with new Xpro and Xpresso pedals. This is a zero-float cleat design, so there are zero (0) degrees of heel float and no lateral float along the pedal axle. It's compatible with all three-hole road shoes, but the included shim may be required for shoes that have a large curvature in the forefoot area. Full details are included in the easy-to-use instructions.
The XPro 10 is perfect for high performance riders. With a carbon body and hollow steel axle the XPro 10 is light and durable at the same time. The ICLIC system is pre-opened making clipping in super easy. The XPro 10 features carbon blade tension adjustment, a low stack height and an oversized pedal platform for pedaling efficiency and comfort.
The XPro 12 is perfect for elite riders. With a carbon body and titanium axle the XPro 12 is light and durable at the same time. Clipping in is easy with the automatic pre-opening ICLIC System. The carbon blade is adjustable in 3 positions to customize engagement tension and the stack height is low, keeping the cyclist's sole as close to the center of the pedal axle as possible. This, along with the large pedal surface area results in incomparable pedaling efficiency and comfort.
The XPro 15 is the ultimate expression in pedal technology. Created for competitive cyclists and triathletes seeking a competitive edge, the XPro 15 features CeramicSpeed watt-saving bearings, a hollow titanium axle and a super light carbon body giving you a pedal that weighs 88 grams per pedal. ICLIC, with its pre-opened engagement system, makes it super easy to clip in. The low stack height and oversized pedal platform make pedaling more efficient and comfortable.
- Compatible with all Spike & Oozy Pedals - Full Complement Sealed Bearing x 2pcs - Green Silicone Friction Seals - Replacement inboard bearings for your SPIKE or OOZY pedals.
Pedal Axle Rebuild Kit for SPIKE & OOZY Trail Pedals - 1 set L&R axle - 2pcs IGUS bushing - 2pcs O-ring - 2pcs dust cap - 2pcs stainless shim washer - 2pcs silicone friction seal - 2pcs lock nut
IGUS Bushing replacements for your Spike or Oozy pedals help to eliminate any play that develops over time, and revive smooth spinning action. - 2pcs IGUS self lubricating bushing - 2pcs O-ring - 2pcs stainless shim washer
SPANK Industries set out to make the perfect pedal for every rider, and the SPOON Pedals offer three platform width options for riders of any age or foot size. The SPOON 90 Pedals are the perfect solution for younger riders and many women who have compromised ideal support and grip with traditional size flat pedals. SPANK SPOON 100 Pedals are ideal for riders with average sized feet who want a flat pedal upgrade that won't break the bank. The extra wide pin pattern on SPANK's SPOON 110 Pedals spread load around the perimeter of large sized shoes, offering more predictable grip and enhanced support over traditional size flat pedals. Each SPOON pedal sports a 16mm-12mm concave profile lined with 20 steel pins, as well as a forged chromoly axle which delivers the strength and durability SPANK pedals are famous for. - SPOON 90 Pedals: US Men size 6 (Euro 39) and under; ±360g /set - SPOON 100 Pedals: Men sizes 7 to 10 (Euro 39-44); ±400g /set - SPOON 110 Pedals: US Men sizes 11 (Euro 44) and up; ±420g /set - Industrial grade axle assembly - Chamfered leading edges - MGR extruded, CNC optimized alloy body - 12-16mm concave platform profile - Cold forged chromoly steel axle - Industrial sealed bearing and IGUS bushing - 20 steel pins per pedal - Shot peen anodized finish with laser logos - Available in Black, Red, Blue, Green - Suitable for Kids, Race, Freeride, Trail
The EXPLORER PD-ES600 pedals are designed for rides requiring frequent engagement and disengagement, such as city touring. Light action springs allow for easy entry and exit, making the new rider feel more confident. CLEAN APPEARANCE - The PD-ES600 features a clean appearance body for use on lightweight road touring bikes. EASY RIDER ADJUSTMENT - Easy-to-adjust entry and release tension settings. SYSTEM ENGINEERED TO WORK TOGETHER - SHIMANO RT footwear is designed to match the PD-ES600.
Get rad without getting broke. This Multi-Purpose Flat Pedal from Shimano has a wide platform and adjustable pin height to dial in the perfect amount of grip for your preference and riding conditions. - 3 different pin height settings to match different type of riding - 9 pins per platform - Highest setting is+5 mm higher than PD-MX80's pins - Weight: 533g
These versatile pedals feature adjustable Shimano SPD bindings on one side and standard cages on the other: the perfect combination for riders who ride with cleated cycling shoes and also with regular shoes. With sealed bearings and chromoly axles, the M324s are durable and practical all-around pedals. - Weight: 533 grams (pair)
PD-M820 FEATURE - Wider contact area - Thinner pedal body - 4 adjustable pins height on each platform BENEFIT - More stability in combination with AM shoes - Lower stack height and less chance of hitting the obstacles - Better grip when not stepped-in - Average weight: 546 g (w/o pins & washers) - 4 height adjustable pins 1.0mm cleat spacer included - Binding: Dual Sided - Cleat included: SM-SH51 - Optional cleat: SM-SH56 - Pedal Type: Off-Road/DH (SPD) - Reflector: SM-PD60
Shimano's PD-R550 SPD-SL Pedals offer wide, stable platforms for great support and stability when you're out on the road. An extra-wide platform maximizes power transfer. Durable stainless steel tread plates reduce flex and pedal body wear. Wide bearing placement provides uniform load distribution for miles and miles of riding. - 310 grams (pair)
PD-T421 FEATURE - CLICK'R binding on one side and flat pedal on the other - Customize the entry and release tension settings - Integrated reflector - Easier to catch the binding BENEFIT close - Versatile use - Longer life - Smart appearance - Weight: 418g - Easy entry and release - Better grip on flat side - Rider tune - Color: Black - Average weight: 418 g - Binding: Single Sided - Cleat included: SM-SH56 - Optional cleat: SM-SH51
- Easy step in, easy step out - Lighter spring tension optimized for beginner riders - Larger entry target for easier engagement - Cascaded features from top-tier systems - Extra-wide platform transfers pedaling power efficiently - Durable stainless steel body plate reduces flex and pedal body wear - Sealed mechanism - Single Sided Binding - Cartridge axle - Cleat retention adjuster - Average weight: 320g - Road clearance: 30 - Cleat included: SM-SH11 - Optional cleat: SM-SH10, SM-SH12 - Pedal Type: Road
Page 1 of 5 Next page