Cycling Gear

Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts

• Colorful • Slides on spokes • 36 beads per card • 6 pieces each of 6 colors

- Eady to install - Spoke mounted - 2 per set

Add a little flair and extra visibility to your ride. A Saddle Charm adds character to the tail of your whip! Made of our woven handlebar tape, a sturdy thread locking loop, and highly reflective 3M trim, our Saddle Charms can be attached to the rails of your saddle, the bag loops on a Brooks England saddle, or just about anywhere on your bike or bag for a pop of added safety and fun. They may even give you a bit of extra luck.

- Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis Superflash Micros and Blinky Safety rear light - Designed specifically for aero seat posts - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal

- Compatible with seatpost diameter 20mm-36mm - Adjustable light angle - Easy on/easy off design makes for quick mounting and removal - Compatible with Blinky 3,5,7, Superflashes, Turbo, Turbo Minis, Superflash Micros and Blinky Safety rear light

- Simplistic safety light designed to be seen - Easy to install silicone strap attachment is compatible with 22.2-31.8mm bars - 3 modes including 1 steady and 2 flashing modes - Powered by 2 CR2032 batteries - Lumens: 6

Others out on the roads and paths will see you when Sunlite's TL-L340 Taillight is on your bike. It sports 3 bright LEDs, steady and flashing modes, and a long run time.

Break or crack a Mirrycle mirror without ruining the mounting hardware? This replacement mirror is just the ticket! Replacement Mirror Holder with Mirror. Fits on The Mountain, LTD, Original, and Road Mirrycle Mirrors. - Hardware not included

•Lightweight, compact design •Easy-read compass •Alloy construction

•Handlebar mount •Right or left hand use •Fits all bicycles •Alloy ping style bell

Clear and Classic Ring Cut through traffic noise and make yourself known on the road while protecting yourself from the risk of auto and pedestrian accidents. Features - Classic ring - Low profile with clean minimalist design - Thumb spring trigger - Quick Assembly: Easy screwdriver assembly installation on 22.2 mm bar - Alloy dome with molded thermoplastic mounting - Weight: 0.04 lb / 18g

Sleek Design Save precious bar space. Features - Classic bell sound - Sleek and unobtrusive design saves precious bar space - Lever action perpendicular to bar - Quick Assembly: Tool-free - strap easily mounts to any size bar 22.2 to 25.4 mm - Alloy dome with molded thermoplastic mounting - Weight: 0.06 lb / 30g

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

Medium sized bells with exciting and classic designs to fit a range from 46mm to 60mm wide. Check out the video for a YouTube sound clip!

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

Dimension Mini Bells take up less room on handlebars and fit 40mm or narrower. Check out the video for a YouTube sound clip!

The NiteRider Tail Light Strap Mount allows for quick installation and fitment on to standard seat posts. It features a quick release tab that allows you to remove just your tail light, leaving the strap mount installed on the seat post; ideal for when you leave your bike unattended or when it's time for a recharge. System Compatibility - Sentinel - Solas - Sabre - CherryBomb - TL 5.0 SL Not compatible with omega 300 and sentry aero 260 tail lights.

This little bell from Origin-8 is light and LOUD! A flick of your finger and the Ding! Ding! rings clear for all to hear.

-Mounts easily to front racks with threaded M5 mounts -Allows for unobstructed light positioning -22.2mm clamping diameter

Don't let the small size fool you. Mirrycle's Incredibell Triple is little, light and LOUD! Plus, its diminutive dimensions let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. The Triple fits the 3 most common handlebar sizes: 22.2mm, 25.4mm and 31.8mm. - Dome Diameter: 37mm (1.3")

Put it on your seatpost, put it on your seatstay, put it anywhere—Sunlite's Griplite goes everywhere. This powerful little light boasts two LEDs and runs for a whopping 100 hours! It has steady and two flashing modes, and is housed in a water-resistant body.

Put it on your handlebars, put it on your fork leg, put it anywhere—Sunlite's Griplite goes everywhere! This powerful little light has 2 LEDs and runs for a whopping 100 hours! It has steady and flashing modes and is housed in a water-resistant body.

• 2 bright Nichia LEDs • Uses 2 CR 2032 lithium batteries (included) • 100 hour run time • 3 modes: 2 flashing and 1 steady • Water-resistant silicone body

• 2 bright Red LEDs • Includes 2 (CR 2032) lithium batteries • 100 hour run time • 3 mode (2 flashing modes & steady mode) • Water resistant silicone body

Classic Ring Minimalist design and low profile. Features - Classic ring - Low profile with clean minimalist design - Adjustable rotating thumb spring trigger for ambidextrous use - Quick Assembly: Tool-free - ratchet strap mounts to any size bar 19.2 - 31.8 mm - Alloy dome with molded thermoplastic mounting - Weight: 0.05 lb / 20g

• Front reflector (white) • Rear reflector (red)

Lezyne's Composite Bar Mount is a hard mount made of a reinforced Composite Matrix cradle for a strong and secure attachment of the Mega Drive, Deca Drive, and XL LED lights to the handlebar. It is designed for 25.4 mm or 31.8 mm bars, with the cradle designed to pivot 15 degrees laterally to allow adjustment of the LED light beam angle and directing it where it is most needed. A large thumb screw secures the CM mount to the bar without need of tools, and can be tightened by hand or a 1mm hex key. Molded rubber shims add grip and fine-tune fitting to undersized bars. Composite Bar Mounts are sold in a kit with the Mega Drive, Deca Drive, or XL LED lights.

Sunlite's HL-K100 Headlight is a great light at a great price. It sports a super-bright Krypton bulb housed in a tough, water-resistant body so it's perfect for commuting year round. A no-tools-required quick-release handlebar mount is included, too.

•Handlebar mount •Fits most bikes •Alloy ringer style bell •53mm